New Tool Automates Splicing of Reel Tapes
Fuji Machine Mfg. Co. Ltd. introduces a new automation and labor saving tool – the Auto Splicing Unit.
Splicing carrier tapes together is one of the most common methods of replenishing parts during production. However, there are problems with this method. For example, there can be variances in the quality of the splicing due to differences in operator skills and this can cause machines to stop. In addition, it can take a long time to perform splicing and there are cases in which multiple parts will need to be spliced at the same time. If splicing is not done in time, machines stop. These are just some of the major challenges keeping lines operating when splicing.
Use this newly developed Auto Splicing Unit to greatly reduce the actual splicing work time from the usual work time of 30-60 seconds down to around 6 seconds. This greatly contributes to keeping the line going by enabling splicing to be completed in a short time. Also, by automating the work with this unit, machine stops from problems caused by the variance in quality due to differing operator skills are eliminated, which contributes to an increase in productivity.
The Auto Splicing Unit handles 8mm carrier tape (paper only) for parts from 0402 (01005″) to 3216. It is available either as battery-operated or with a plug-in to the AC mains. http://www.fuji.co.jp/e/